ULTRASONIC SENSOR
- Specification:
- Bluetooth protocal: Bluetooth Specification v2.0+EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Emission power: =4dBm, Class 2
- Sensitivity: =-84dBm at 0.1% BER
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
- Security: Authentication and encryption
- Profiles: Bluetooth serial port
- Power supply: +3.3VDC 50mA
- Working temperature: -20 ~ +75 Centigrade
- Dimension: 26.9mm x 13mm x 2.2 mm
₹99.00 ₹149.00
Feature:
- Working current: matching for 30 MA, matching the communication for 8 MA.
- Dormancy current: no dormancy.
- Used for GPS navigation system, water and electricity gas meter reading system.
- With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment.
- Bluetooth module HC-08 Master and slave Two in one module
- Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards
- Module working voltage 3.3 V
- Potter default rate of 9600, the user can be set up
Based on 0 reviews
Be the first to review “ULTRASONIC SENSOR”
Related products
-
ELECTRONICS
RAIN DROP SENSOR
The raindrop sensor module is used for rain detection. It is also for measuring rainfall intensity. The module includes a rain board and a control board that are separate for more convenience. It has a power indicator LED and an adjustable sensitivity though a potentiometer. The module is based on the LM393 op amp. It includes a printed circuit board (control board) that “collects” the rain drops. As rain drops are collected on the circuit board, they create paths of parallel resistance that are measured via the op amp. The lower the resistance (or the more water), the lower the voltage output. Conversely, the less water, the greater the output voltage on the analog pin. A completely dry board for example will cause the module to output five volts.
SKU: n/a₹149.00 -
ELECTRONICS
3D Printer with High Accuracy Self Assembly DIY Kit
- Unassembled DIY kit: It is unassembled DIY kit, provide you an unforgettable step-by-step learning experience of 3D printer from scratch. As long as you have a passion for creativity, you can not afford to miss this product
- Support ABS / PLA / Wood / Nylon PVA / PP / Luminescent Multiple 3D printing filament supportable, support ABS / PLA / Wood / Nylon PVA / PP / Luminescent
- Widely used Suitable for a wide range of consumers, young or old, professional or amateur
- Operating system and Working environment Windows XP / Windows 7 / Windows 8 / Windows 10 /Mac / Linux. Temperature: 10 – 30 Deg.C, humidity: 20 – 50 Deg.C
SKU: n/a -
ELECTRONICS
FLEX SENSOR
Flex sensors are usually available in two sizes. One is 2.2 inch and another is 4.5 inch. Although the sizes are different the basic function remains the same. They are also divided based on resistance. There are LOW resistance, MEDIUM resistance and HIGH resistance types. Choose the appropriate type depending on requirement. Here we are going to discuss 2.2inch Flex sensor that is FS-L-0055.
SKU: n/a₹499.00
There are no reviews yet.